This is a purely informative rendering of an RFC that includes verified errata. This rendering may not be used as a reference.

The following 'Verified' errata have been incorporated in this document: EID 4863
Network Working Group                                   A. Melnikov, Ed.
Request for Comments: 4752                                         Isode
Obsoletes: 2222                                            November 2006
Category: Standards Track


                       The Kerberos V5 ("GSSAPI")
       Simple Authentication and Security Layer (SASL) Mechanism

Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The IETF Trust (2006).

Abstract

   The Simple Authentication and Security Layer (SASL) is a framework
   for adding authentication support to connection-based protocols.
   This document describes the method for using the Generic Security
   Service Application Program Interface (GSS-API) Kerberos V5 in the
   SASL.

   This document replaces Section 7.2 of RFC 2222, the definition of the
   "GSSAPI" SASL mechanism.  This document, together with RFC 4422,
   obsoletes RFC 2222.

Table of Contents

   1. Introduction ....................................................2
      1.1. Relationship to Other Documents ............................2
   2. Conventions Used in This Document ...............................2
   3. Kerberos V5 GSS-API Mechanism ...................................2
      3.1. Client Side of Authentication Protocol Exchange ............3
      3.2. Server Side of Authentication Protocol Exchange ............4
      3.3. Security Layer .............................................6
   4. IANA Considerations .............................................7
   5. Security Considerations .........................................7
   6. Acknowledgements ................................................8
   7. Changes since RFC 2222 ..........................................8
   8. References ......................................................8
      8.1. Normative References .......................................8
      8.2. Informative References .....................................9

1.  Introduction

   This specification documents currently deployed Simple Authentication
   and Security Layer (SASL [SASL]) mechanism supporting the Kerberos V5
   [KERBEROS] Generic Security Service Application Program Interface
   ([GSS-API]) mechanism [RFC4121].  The authentication sequence is
   described in Section 3.  Note that the described authentication
   sequence has known limitations, in particular, it lacks channel
   bindings and the number of round-trips required to complete
   authentication exchange is not minimal.  SASL WG is working on a
   separate document that should address these limitations.

1.1.  Relationship to Other Documents

   This document, together with RFC 4422, obsoletes RFC 2222 in its
   entirety.  This document replaces Section 7.2 of RFC 2222.  The
   remainder is obsoleted as detailed in Section 1.2 of RFC 4422.

2.  Conventions Used in This Document

   The key words "MUST", "MUST NOT", "SHOULD", "SHOULD NOT", and "MAY"
   in this document are to be interpreted as defined in "Key words for
   use in RFCs to Indicate Requirement Levels" [KEYWORDS].

3.  Kerberos V5 GSS-API Mechanism

   The SASL mechanism name for the Kerberos V5 GSS-API mechanism
   [RFC4121] is "GSSAPI".  Though known as the SASL GSSAPI mechanism,
   the mechanism is specifically tied to Kerberos V5 and GSS-API's
   Kerberos V5 mechanism.

   The GSSAPI SASL mechanism is a "client goes first" SASL mechanism;
   i.e., it starts with the client sending a "response" created as
   described in the following section.

   The implementation MAY set any GSS-API flags or arguments not
   mentioned in this specification as is necessary for the
   implementation to enforce its security policy.

   Note that major status codes returned by GSS_Init_sec_context() or
   GSS_Accept_sec_context() other than GSS_S_COMPLETE or
   GSS_S_CONTINUE_NEEDED cause authentication failure.  Major status
   codes returned by GSS_Unwrap() other than GSS_S_COMPLETE (without any
   additional supplementary status codes) cause authentication and/or
   security layer failure.

3.1.  Client Side of Authentication Protocol Exchange

   The client calls GSS_Init_sec_context, passing in
   input_context_handle of 0 (initially), mech_type of the Kerberos V5
   GSS-API mechanism [KRB5GSS], chan_binding of NULL, and targ_name
   equal to output_name from GSS_Import_Name called with input_name_type
   of GSS_C_NT_HOSTBASED_SERVICE (*) and input_name_string of
   "service@hostname" where "service" is the service name specified in
   the protocol's profile, and "hostname" is the fully qualified host
   name of the server.  When calling the GSS_Init_sec_context, the
   client MUST pass the integ_req_flag of TRUE (**).  If the client will
   be requesting a security layer, it MUST also supply to the
   GSS_Init_sec_context a mutual_req_flag of TRUE, and a
   sequence_req_flag of TRUE.  If the client will be requesting a
   security layer providing confidentiality protection, it MUST also
   supply to the GSS_Init_sec_context a conf_req_flag of TRUE.  The
   client then responds with the resulting output_token.  If
   GSS_Init_sec_context returns GSS_S_CONTINUE_NEEDED, then the client
   should expect the server to issue a token in a subsequent challenge.
   The client must pass the token to another call to
   GSS_Init_sec_context, repeating the actions in this paragraph.

   (*) Clients MAY use name types other than GSS_C_NT_HOSTBASED_SERVICE
   to import servers' acceptor names, but only when they have a priori
   knowledge that the servers support alternate name types.  Otherwise
   clients MUST use GSS_C_NT_HOSTBASED_SERVICE for importing acceptor
   names.

   (**) Note that RFC 2222 [RFC2222] implementations will not work with
   GSS-API implementations that require integ_req_flag to be true.  No
   implementations of RFC 1964 [KRB5GSS] or RFC 4121 [RFC4121] that
   require integ_req_flag to be true are believed to exist and it is
   expected that any future update to [RFC4121] will require that

   integrity be available even in not explicitly requested by the
   application.

   When GSS_Init_sec_context returns GSS_S_COMPLETE, the client examines
   the context to ensure that it provides a level of protection
   permitted by the client's security policy.  In particular, if the
   integ_avail flag is not set in the context, then no security layer
   can be offered or accepted.

   If the conf_avail flag is not set in the context, then no security
   layer with confidentiality can be offered or accepted.  If the
   context is acceptable, the client takes the following actions: If the
   last call to GSS_Init_sec_context returned an output_token, then the
   client responds with the output_token, otherwise the client responds
   with no data.  The client should then expect the server to issue a
   token in a subsequent challenge.  The client passes this token to
   GSS_Unwrap and interprets the first octet of resulting cleartext as a
   bit-mask specifying the security layers supported by the server and
   the second through fourth octets as the maximum size output_message
   the server is able to receive (in network byte order).  If the
   resulting cleartext is not 4 octets long, the client fails the
   negotiation.  The client verifies that the server maximum buffer is 0
   if the server does not advertise support for any security layer.

   The client then constructs data, with the first octet containing the
   bit-mask specifying the selected security layer, the second through
   fourth octets containing in network byte order the maximum size
   output_message the client is able to receive (which MUST be 0 if the
   client does not support any security layer), and the remaining octets
   containing the UTF-8 [UTF8] encoded authorization identity.
   (Implementation note: The authorization identity is not terminated
   with the zero-valued (%x00) octet (e.g., the UTF-8 encoding of the
   NUL (U+0000) character)).  The client passes the data to GSS_Wrap
   with conf_req_flag set to FALSE and responds with the generated 
EID 4863 (Verified) is as follows:

Section: 3.1 - 3.3

Original Text:

conf_flag

Corrected Text:

conf_req_flag
Notes:
The three sections 3.1, 3.2 and 3.3 refer to a flag "conf_flag" which does not exist in the GSS_Wrap call as specified in RFC 2743 (https://tools.ietf.org/html/rfc2743#page-65). The correct name is "conf_req_flag".

I also looked in the previous version of RFC 2743 -> RFC 2078 but the same applies there.
output_message. The client can then consider the server authenticated. 3.2. Server Side of Authentication Protocol Exchange A server MUST NOT advertise support for the "GSSAPI" SASL mechanism described in this document unless it has acceptor credential for the Kerberos V GSS-API mechanism [KRB5GSS]. The server passes the initial client response to GSS_Accept_sec_context as input_token, setting input_context_handle to 0 (initially), chan_binding of NULL, and a suitable acceptor_cred_handle (see below). If GSS_Accept_sec_context returns GSS_S_CONTINUE_NEEDED, the server returns the generated output_token to the client in challenge and passes the resulting response to another call to GSS_Accept_sec_context, repeating the actions in this paragraph. Servers SHOULD use a credential obtained by calling GSS_Acquire_cred or GSS_Add_cred for the GSS_C_NO_NAME desired_name and the Object Identifier (OID) of the Kerberos V5 GSS-API mechanism [KRB5GSS](*). Servers MAY use GSS_C_NO_CREDENTIAL as an acceptor credential handle. Servers MAY use a credential obtained by calling GSS_Acquire_cred or GSS_Add_cred for the server's principal name(s) (**) and the Kerberos V5 GSS-API mechanism [KRB5GSS]. (*) Unlike GSS_Add_cred the GSS_Acquire_cred uses an OID set of GSS- API mechanism as an input parameter. The OID set can be created by using GSS_Create_empty_OID_set and GSS_Add_OID_set_member. It can be freed by calling the GSS_Release_oid_set. (**) Use of server's principal names having GSS_C_NT_HOSTBASED_SERVICE name type and "service@hostname" format, where "service" is the service name specified in the protocol's profile, and "hostname" is the fully qualified host name of the server, is RECOMMENDED. The server name is generated by calling GSS_Import_name with input_name_type of GSS_C_NT_HOSTBASED_SERVICE and input_name_string of "service@hostname". Upon successful establishment of the security context (i.e., GSS_Accept_sec_context returns GSS_S_COMPLETE), the server SHOULD verify that the negotiated GSS-API mechanism is indeed Kerberos V5 [KRB5GSS]. This is done by examining the value of the mech_type parameter returned from the GSS_Accept_sec_context call. If the value differs, SASL authentication MUST be aborted. Upon successful establishment of the security context and if the server used GSS_C_NO_NAME/GSS_C_NO_CREDENTIAL to create acceptor credential handle, the server SHOULD also check using the GSS_Inquire_context that the target_name used by the client matches either - the GSS_C_NT_HOSTBASED_SERVICE "service@hostname" name syntax, where "service" is the service name specified in the application protocol's profile, or - the GSS_KRB5_NT_PRINCIPAL_NAME [KRB5GSS] name syntax for a two- component principal where the first component matches the service name specified in the application protocol's profile. When GSS_Accept_sec_context returns GSS_S_COMPLETE, the server examines the context to ensure that it provides a level of protection permitted by the server's security policy. In particular, if the integ_avail flag is not set in the context, then no security layer can be offered or accepted. If the conf_avail flag is not set in the context, then no security layer with confidentiality can be offered or accepted. If the context is acceptable, the server takes the following actions: If the last call to GSS_Accept_sec_context returned an output_token, the server returns it to the client in a challenge and expects a reply from the client with no data. Whether or not an output_token was returned (and after receipt of any response from the client to such an output_token), the server then constructs 4 octets of data, with the first octet containing a bit-mask specifying the security layers supported by the server and the second through fourth octets containing in network byte order the maximum size output_token the server is able to receive (which MUST be 0 if the server does not support any security layer). The server must then pass the plaintext to GSS_Wrap with conf_flag set to FALSE and issue the generated output_message to the client in a challenge. The server must then pass the resulting response to GSS_Unwrap and interpret the first octet of resulting cleartext as the bit-mask for the selected security layer, the second through fourth octets as the maximum size output_message the client is able to receive (in network byte order), and the remaining octets as the authorization identity. The server verifies that the client has selected a security layer that was offered and that the client maximum buffer is 0 if no security layer was chosen. The server must verify that the src_name is authorized to act as the authorization identity. After these verifications, the authentication process is complete. The server is not expected to return any additional data with the success indicator. 3.3. Security Layer The security layers and their corresponding bit-masks are as follows: 1 No security layer 2 Integrity protection. Sender calls GSS_Wrap with conf_flag set to FALSE 4 Confidentiality protection. Sender calls GSS_Wrap with conf_flag set to TRUE Other bit-masks may be defined in the future; bits that are not understood must be negotiated off. When decoding any received data with GSS_Unwrap, the major_status other than the GSS_S_COMPLETE MUST be treated as a fatal error. Note that SASL negotiates the maximum size of the output_message to send. Implementations can use the GSS_Wrap_size_limit call to determine the corresponding maximum size input_message. 4. IANA Considerations IANA modified the existing registration for "GSSAPI" as follows: Family of SASL mechanisms: NO SASL mechanism name: GSSAPI Security considerations: See Section 5 of RFC 4752 Published specification: RFC 4752 Person & email address to contact for further information: Alexey Melnikov <Alexey.Melnikov@isode.com> Intended usage: COMMON Owner/Change controller: iesg@ietf.org Additional information: This mechanism is for the Kerberos V5 mechanism of GSS-API. 5. Security Considerations Security issues are discussed throughout this memo. When constructing the input_name_string, the client SHOULD NOT canonicalize the server's fully qualified domain name using an insecure or untrusted directory service. For compatibility with deployed software, this document requires that the chan_binding (channel bindings) parameter to GSS_Init_sec_context and GSS_Accept_sec_context be NULL, hence disallowing use of GSS-API support for channel bindings. GSS-API channel bindings in SASL is expected to be supported via a new GSS-API family of SASL mechanisms (to be introduced in a future document). Additional security considerations are in the [SASL] and [GSS-API] specifications. Additional security considerations for the GSS-API mechanism can be found in [KRB5GSS] and [KERBEROS]. 6. Acknowledgements This document replaces Section 7.2 of RFC 2222 [RFC2222] by John G. Myers. He also contributed significantly to this revision. Lawrence Greenfield converted text of this document to the XML format. Contributions of many members of the SASL mailing list are gratefully acknowledged, in particular comments from Chris Newman, Nicolas Williams, Jeffrey Hutzelman, Sam Hartman, Mark Crispin, and Martin Rex. 7. Changes since RFC 2222 RFC 2078 [RFC2078] specifies the version of GSS-API used by RFC 2222 [RFC2222], which provided the original version of this specification. That version of GSS-API did not provide the integ_integ_avail flag as an input to GSS_Init_sec_context. Instead, integrity was always requested. RFC 4422 [SASL] requires that when possible, the security layer negotiation be integrity protected. To meet this requirement and as part of moving from RFC 2078 [RFC2078] to RFC 2743 [GSS-API], this specification requires that clients request integrity from GSS_Init_sec_context so they can use GSS_Wrap to protect the security layer negotiation. This specification does not require that the mechanism offer the integrity security layer, simply that the security layer negotiation be wrapped. 8. References 8.1. Normative References [GSS-API] Linn, J., "Generic Security Service Application Program Interface Version 2, Update 1", RFC 2743, January 2000. [KERBEROS] Neuman, C., Yu, T., Hartman, S., and K. Raeburn, "The Kerberos Network Authentication Service (V5)", RFC 4120, July 2005. [KEYWORDS] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [KRB5GSS] Linn, J., "The Kerberos Version 5 GSS-API Mechanism", RFC 1964, June 1996. [RFC4121] Zhu, L., Jaganathan, K., and S. Hartman, "The Kerberos Version 5 Generic Security Service Application Program Interface (GSS-API) Mechanism: Version 2", RFC 4121, July 2005. [SASL] Melnikov, A. and K. Zeilenga, "Simple Authentication and Security Layer (SASL)", RFC 4422, June 2006. [UTF8] Yergeau, F., "UTF-8, a transformation format of ISO 10646", STD 63, RFC 3629, November 2003. 8.2. Informative References [RFC2078] Linn, J., "Generic Security Service Application Program Interface, Version 2", RFC 2078, January 1997. [RFC2222] Myers, J., "Simple Authentication and Security Layer (SASL)", RFC 2222, October 1997. Editor's Address Alexey Melnikov Isode Limited 5 Castle Business Village 36 Station Road Hampton, Middlesex TW12 2BX UK EMail: Alexey.Melnikov@isode.com URI: http://www.melnikov.ca/ Full Copyright Statement Copyright (C) The IETF Trust (2006). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST, AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Acknowledgement Funding for the RFC Editor function is currently provided by the Internet Society.