Network Working Group                                           J. Zsako
Request for Comments: 2726                                       BankNet
Category: Standards Track                                  December 1999


              PGP Authentication for RIPE Database Updates

Status of this Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (1999).  All Rights Reserved.

Abstract

   This document presents the proposal for a stronger authentication
   method of the updates of the RIPE database based on digital
   signatures. The proposal tries to be as general as possible as far as
   digital signing methods are concerned, however, it concentrates
   mainly on PGP, as the first method to be implemented.  The proposal
   is the result of the discussions within the RIPE DBSEC Task Force.

1. Rationale

   An increasing need has been identified for a stronger authentication
   of the database maintainer upon database updates (addition,
   modification and deletion of objects). The existing authentication
   methods have serious security problems: the MAIL-FROM has the
   drawback that a mail header is very easy to forge whereas CRYPT-PW is
   exposed to message interception, since the password is sent
   unencrypted in the update mail message.

   The goal was to implement a digital signature mechanism based on a
   widely available and deployed technology. The first choice was PGP,
   other methods may follow at a later date. PGP is presently quite
   widely used within the Internet community and is available both in
   and outside the US.

   The current aim is for an improved authentication method and nothing
   more (in particular, this paper does not try to cover authorization
   issues other than those related to authentication).




Zsako                       Standards Track                     [Page 1]


RFC 2726      PGP Authentication for RIPE Database Updates December 1999


2. Changes to the RIPE database

   In order to make the database as much self consistent as possible,
   the key certificates are stored in the RIPE database. For efficiency
   reasons a local keyring of public keys will also be maintained,
   however, the local keyring will only contain a copy of the key
   certificates present in the database. The synchronization of the
   database with the local keyring will be made as often as possible.
   The database objects will be created only via the current e-mail
   mechanism (auto-dbm@ripe.net), in particular no public key
   certificate will be retrieved from a key server by the database
   software.

   The presence of the key certificates in the database will allow the
   users of the database to check the "identity" of the maintainer, in
   the sense that they can query the database for the certificate of the
   key the database software uses for authenticating the maintainer.
   This key certificate can then be checked for existing signatures and
   can possibly be compared with the key certificate obtained by other
   means for the same user (e.g. from the owner himself of from a public
   key server). Although the key certificates can be stored in the RIPE
   database with any number of signatures, since the RIPE database is
   not communicating directly with the public key servers, it is a good
   practice to add the key certificate with the minimum number of
   signatures possible (preferably with just one signature: the one of
   itself).  See also section 4. for more details.

2.1. The key-cert object

   A new object type is defined below for the purpose of storing the key
   certificates of the maintainers:

   key-cert:  [mandatory]  [single]     [primary/look-up key]
   method:    [generated]  [single]     [ ]
   owner:     [generated]  [multiple]   [ ]
   fingerpr:  [generated]  [single]     [ ]
   certif:    [mandatory]  [single]     [ ]
   remarks:   [optional]   [multiple]   [ ]
   notify:    [optional]   [multiple]   [inverse key]
   mnt-by:    [mandatory]  [multiple]   [inverse key]
   changed:   [mandatory]  [multiple]   [ ]
   source:    [mandatory]  [single]     [ ]

   The syntax and the semantics of the different attributes are
   described below.






Zsako                       Standards Track                     [Page 2]


RFC 2726      PGP Authentication for RIPE Database Updates December 1999


   key-cert: Is of the form PGPKEY-hhhhhhhh, where hhhhhhhh stands for
      for the hex representation of the four bytes ID of the PGP key.
      The key certificate detailed in the certif attribute belongs to
      the PGP key with the id hhhhhhhh. The reason for having PGPKEY- as
      a prefix is to allow for other types of key certificates at a
      later date, and at the same time to be able to clearly
      differentiate at query time between a person query and a key
      certificate query.  At the time of the creation/modification of
      the key-cert object, the database software checks whether the key
      certificate in the certif attribute indeed belongs to the PGP id
      specified here. The creation/modification is authorized only upon
      the match of these two ids.

   method:  Line containing the name of the signing method.  This is the
      name of the digital signature method. The present certificate
      belongs to a key for digitally signing messages using the
      specified method.  The method attribute is generated automatically
      by the database software upon creation of the key-cert object.
      Any method attribute present in the object at the time of the
      submission for creation is ignored.  The method has to be
      consistent with both the prefix of the id in the key-cert
      attribute and with the certificate contained in the certif
      attributes. If these latter two (i.e. prefix and certificate) are
      not consistent, the key-cert object creation is refused. For the
      PGP method this will be the string "PGP" (without the quotes).

   owner:  Line containing a description of the owner of the key.  For a
      PGP key, the owners are the user ids associated with the key.  For
      each user id present in the key certificate, an owner attribute is
      generated automatically by the database software upon creation of
      the key-cert object.  Any owner attribute present in the object at
      the time of the submission for creation is ignored.

   fingerpr:  A given number of hex encoded bytes, separated for better
      readability by spaces.  It represents the fingerprint of the key
      associated with the present certificate.  This is also a field
      generated upon creation of the object instance.  Any fingerpr
      attribute submitted to the robot is ignored.  The reason for
      having this attribute (and the owner attribute) is to allow for an
      easy check of the key certificate upon a query of the database.
      The querier gets the owner and fingerprint information without
      having to add the certificate to his/her own public keyring.
      Also, since these two attributes are _generated_ by the database
      software from the certificate, one can trust them (as much as one
      can trust the database itself).






Zsako                       Standards Track                     [Page 3]


RFC 2726      PGP Authentication for RIPE Database Updates December 1999


   certif:  Line containing a line of the ASCII armoured key
      certificate.  The certif attribute lines contain the key
      certificate.  In the case of PGP, they also contain the delimiting
      lines (BEGIN/END PGP PUBLIC KEY BLOCK).  Obviously the order of
      the lines is essential, therefore the certif attribute lines are
      presented at query time in the same order as they have been
      submitted at creation.  A database client application could
      contain a script that strips the certif attribute lines (returned
      as a result of a query) from the leading "certif:" string and the
      following white spaces and import the remainder in the local
      keyring.

   mnt-by:  The usual syntax the usual semantics this attribute is
      _mandatory_ for this object. Therefore, the existence of a mntner
      object is a prerequisite for the creation of a key-cert object.
      The mntner referenced in the mnt-by attribute may not have the
      auth attribute set to NONE.

   remarks:,
   notify:,
   changed:,
   source:  the usual syntax and semantics.

   In the case of PGP, when a key-cert object is created, the associated
   key is also added to a local keyring of public keys. When a key-cert
   object is deleted, the corresponding public key is deleted from the
   local keyring as well. Whenever a key-cert object is modified, the
   key is deleted from the local keyring and the key associated with the
   new certificate is added to the keyring (obviously this is performed
   only when the database update is authorized, in particular if the new
   key certificate does belong to the id specified in the attribute
   key-cert, see above).

2.2. Changes to the mntner object

   The only change is that there is a new possible value for the auth
   attribute.  This value is of the form PGPKEY-<id>, where <id> is the
   hex representation of the four bytes id of the PGP public key used
   for authentication.

   The semantics of this new value is that the PGP key associated with
   the key certificate stored in the key-cert object identified by
   PGPKEY-id is used to check the signature of any
   creation/modification/deletion message sent to auto-dbm@ripe.net
   affecting an object maintained by this mntner.






Zsako                       Standards Track                     [Page 4]


RFC 2726      PGP Authentication for RIPE Database Updates December 1999


   Just as with other values, the auth attribute can be multiple. It
   does not make much sense to have two auth attributes with different
   methods (e.g.  PGPKEY-<id> and NONE :)) ), just as it didn't earlier
   either.

   If there are several auth methods with a PGPKEY-<id> value, the
   semantics is the already known one, namely that _either_ signature is
   accepted.

3. The PGP signed creation/modification/deletion

   The whole message has to be signed. This means, that the database
   software first checks whether the message is a PGP signed message. If
   it is, it checks for a valid signature and associates this signature
   with the objects submitted in the message. A message may contain only
   one PGP signature.

   If an object present in a message has a mnt-by attribute, and the
   respective mntner has auth attribute(s) with PGPKEY-<id> value, the
   database software checks whether the object has a signature
   associated with it (i.e. whether the message being processed had been
   signed) and whether the type of the signature (PGP in this
   implementation phase) and the id of the key used for signing the
   message is the same as the one in (one of) the auth attribute(s). The
   creation/modification/deletion of the object is performed only if
   this authentication succeeds.

   This approach allows for a simplification of the message parsing
   process.  A different approach would be necessary if one would sign
   the _objects_, rather then the update messages. In case the objects
   would be signed, the parser would have to identify which objects were
   signed, check the signature(s) on each object individually and
   permit/refuse the update at an object level, depending on (amongst
   others) whether the signature is valid and whether it belongs to (one
   of) the maintainer(s). This approach would allow for mixing in the
   same e-mail message objects signed by different maintainers (which
   would probably not be typical), and it would also allow for storing
   the signature in the database (in order to allow for the verification
   of the signature at query time). This latter (i.e. storing the
   signatures in the database) is beyond the scope of the first phase of
   the implementation. It may become a goal at a later date.

   It is recommended to check that the mailer program does not make any
   transformations on the text of the e-mail message (and possibly
   configure it not to do any). Such common transformations are line-
   wrapping after a given number of characters, transforming of tabs in
   spaces, etc. Also check that you only use ASCII characters in the
   message.



Zsako                       Standards Track                     [Page 5]


RFC 2726      PGP Authentication for RIPE Database Updates December 1999


4. Requirements the PGP key certificates must meet

   There is no limitation imposed with respect to the version of the PGP
   software that is/was used for the creation of the key. Key of both
   version 2.x and 5.0 are supported, although the keys generated with
   version 5.0 are recommended.

   The key certificates submitted for creating a key-cert object must
   contain a signature of the key itself. Although the certificate may
   contain other signatures as well, it is recommended to create the
   key-cert object with as few signatures as possible in the
   certificate. Anyone concerned about the trustfulness of the key
   should retrieve a copy of the key certificate from a public key
   server (or by any other appropriate means and check the signatures
   present in _that_ certificate. If such a check is performed one
   should take care to check both the key fingerprint and the key type
   and length in order to make sure the two certificates (the one
   retrieved from the RIPE database and the one retrieved from the
   public key server or collected by other means) belong to the same
   key.

   Although it is highly unlikely, it may happen that a key-cert with
   the id identical to the id of the key of a maintainer already exists
   in the RIPE database.  In case this latter key had been used for a
   while and it had been registered at public key servers for some time,
   the given person should contact the RIPE NCC and report this to
   ripe-dbm@ripe.net. Anyway, he/she may have to create a new key and
   register _its_ certificate into the RIPE database. Such a procedure,
   although highly unlikely to happen, should not create serious
   problems to the respective maintainer.

5. Short overview of the tasks to be performed in order to use PGP
   authentication

   You must have a mntner object in the RIPE database with auth: other
   than NONE.  The mntner object has to be created in the traditional
   way.

   You must get a certificate of your own key and prepare a key-cert
   object from it. The object has to reference in mnt-by the mntner
   mentioned above.

   Create the key-cert object in the RIPE database, by sending the
   object prepared above to auto-dbm@ripe.net. Obviously you must pass
   the authentication checks required by the mntner object (i.e.  mail
   from a predefined address or send the correct password).





Zsako                       Standards Track                     [Page 6]


RFC 2726      PGP Authentication for RIPE Database Updates December 1999


   Change the mntner object to have the auth: attribute value of
   PGPKEY-<id>, where <id> is the hex id of your PGP key.

   Check all objects maintained by the given mntner (preferably with the
   command This is the only way to benefit from the stronger
   authentication method in order to assign more trustfulness to the
   database. Remember that you are the only person who can check for and
   correct possible inconsistencies.

   From now on always sign the (whole) update messages that refer to
   objects maintained by you, with the key you submitted to the RIPE
   database.







































Zsako                       Standards Track                     [Page 7]


RFC 2726      PGP Authentication for RIPE Database Updates December 1999


6. Example of objects using the new feature

   mntner:      AS3244-MNT
   descr:       BankNet, Budapest HU
   descr:       Eastern European Internet Provider via own VSAT network
   admin-c:     JZ38
   tech-c:      JZ38
   tech-c:      IR2-RIPE
   upd-to:      ncc@banknet.net
   mnt-nfy:     ncc@banknet.net
   auth:        PGPKEY-23F5CE35
   remarks:     This is the maintainer of all BankNet related objects
   notify:      ncc@banknet.net
   mnt-by:      AS3244-MNT
   changed:     zsako@banknet.net 19980525
   source:      RIPE

   key-cert: PGPKEY-23F5CE35
   method:   PGP
   owner:    Janos Zsako <zsako@banknet.net>
   fingerpr: B5 D0 96 D0 D0 D3 2B B2  B8 C2 5D 22 D4 F5 78 92
   certif: -----BEGIN PGP PUBLIC KEY BLOCK-----
    Version: 2.6.2i
   +
    mQCNAzCqKdIAAAEEAPMSQtBNFFuTS0duoUiqnPHm05dxrI76rrOGwx+OU5tzGavx
    cm2iCInNtikeKjlIMD7FiCH1J8PWdZivpwhzuGeeMimT8ZmNn4z3bb6ELRyiZOvs
    4nfxVlh+kKKD9JjBfy8DnuMs5sT0jw4FEt/PYogJinFdndzywXHzGHEj9c41AAUR
    tB9KYW5vcyBac2FrbyA8enNha29AYmFua25ldC5uZXQ+iQCVAwUQMjkx2XHzGHEj
    9c41AQEuagP/dCIBJP+R16Y70yH75kraRzXY5rnsHmT0Jknrc/ihEEviRYdMV7X1
    osP4pmDU8tNGf0OfGrok7KDTCmygIh7/me+PKrDIj0YkAVUhBX3gBtpSkhEmkLqf
    xbhYwDn4DV3zF7f5AMsbD0UCBDyf+vpkMzgd1Pbr439iXdgwgwta50qJAHUDBRAy
    OSsrO413La462EEBAdIuAv4+Cao1wqBG7+gIm1czIb1M2cAM7Ussx6y+oL1d+HqN
    PRhx4upLVg8Eqm1w4BYpOxdZKkxumIrIvrSxUYv4NBnbwQaa0/NmBou44jqeN+y2
    xwxAEVd9BCUtT+YJ9iMzZlE=
    =w8xL
    -----END PGP PUBLIC KEY BLOCK-----
   remarks: This is an example of PGP key certificate
   mnt-by:  AS3244-MNT
   changed: zsako@banknet.net 19980525
   source:  RIPE











Zsako                       Standards Track                     [Page 8]


RFC 2726      PGP Authentication for RIPE Database Updates December 1999


7. Security Considerations

   This document addresses authentication of transactions for making
   additions, deletions, and updates to the routing policy information
   through strong cryptographic means.  The authorization of these
   transactions are addressed in [1].

8. Acknowledgements

   The present proposal is the result of the discussions within the RIPE
   DBSEC Task Force, which was set up at RIPE 27 in Dublin at the
   initiative of Joachim Schmitz and Wilfried Woeber. The list of
   participants who have contributed to the discussions at different
   ocasions (TF meetings and via e-mail) is (in alphabetical order):
   Cengiz Allaettinoglu, Joao Luis Silva Damas, Havard Eidnes, Chris
   Fletcher, Daniel Karrenberg, David Kessens, Jake Khuon, Craig
   Labovitz, Carl Malamud, Dave Meyer, Maldwyn Morris, Sandy Murphy,
   Mike Norris, Carol Orange, Joachim Schmitz, Tom Spindler, Don
   Stikvoort, Curtis Villamizar, Gerald Winters, Wilfried Woeber, Janos
   Zsako.

9. References

   [1]  Meyer, D., Villamizar, C., Alaettinoglu, C. and S.  Murphy,
        "Routing Policy System Security", RFC 2725, December 1999.

10. Author's Address

   Janos Zsako
   BankNet
   1121 Budapest
   Konkoly-Thege ut 29-33.
   Hungary

   Phone: +36 1 395 90 28
   Fax:   +36 1 395 90 32
   EMail: zsako@banknet.net














Zsako                       Standards Track                     [Page 9]


RFC 2726      PGP Authentication for RIPE Database Updates December 1999


11. Notices

   PGP is a commercial software.

   The IETF takes no position regarding the validity or scope of any
   intellectual property or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; neither does it represent that it
   has made any effort to identify any such rights.  Information on the
   IETF's procedures with respect to rights in standards-track and
   standards-related documentation can be found in BCP-11.  Copies of
   claims of rights made available for publication and any assurances of
   licenses to be made available, or the result of an attempt made to
   obtain a general license or permission for the use of such
   proprietary rights by implementors or users of this specification can
   be obtained from the IETF Secretariat.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights which may cover technology that may be required to practice
   this standard.  Please address the information to the IETF Executive
   Director.




























Zsako                       Standards Track                    [Page 10]


RFC 2726      PGP Authentication for RIPE Database Updates December 1999


12.  Full Copyright Statement

   Copyright (C) The Internet Society (1999).  All Rights Reserved.

   This document and translations of it may be copied and furnished to
   others, and derivative works that comment on or otherwise explain it
   or assist in its implementation may be prepared, copied, published
   and distributed, in whole or in part, without restriction of any
   kind, provided that the above copyright notice and this paragraph are
   included on all such copies and derivative works.  However, this
   document itself may not be modified in any way, such as by removing
   the copyright notice or references to the Internet Society or other
   Internet organizations, except as needed for the purpose of
   developing Internet standards in which case the procedures for
   copyrights defined in the Internet Standards process must be
   followed, or as required to translate it into languages other than
   English.

   The limited permissions granted above are perpetual and will not be
   revoked by the Internet Society or its successors or assigns.

   This document and the information contained herein is provided on an
   "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
   TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
   BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
   HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.



















Zsako                       Standards Track                    [Page 11]